Products > vibro spreader

Vibro Spreader

This unique water spreader is one of Ein-Tal’s leading products for low volume irrigation. It generates a circular uniform droplet distribution over a range of throw diameters from 2 to 6 meters.

The product is available for a variety of flow rates, from 20 liter/hr (5.3 GPH) to 160 liter/hr (42.3 GPH). The nominal flow rate values are for a pressure of 2 bars (30PSI) and variations of the flow under pressure are provided in the Flow Rate Chart. A special High-Rate / Heavy Duty vibro-spreader of 240 liter/hr is also available.

The wetting diameter is proportional to the flow rate (and related pressure). The respective data is provided in the Diagram of Wetting Diameters.

Installation of the Vibro-Spreader is possible in any orientation.

The picture on the right shows the upright and upside-down options.

When in upright position, the Vibro-Spreader is automatically sealed against insects after water shut down.

 

The upside down version is extremely useful for overhead irrigation in greenhouses. In this mode the device is hanging down from an upper supply line.

The Vibro-Spreader is designed with a center pin which is free to locate itself in the middle of the nozzle and vibrates by the water flow. This vibration, together with the impingement of the water jet on the upper cap, generates the fine axi-symmetric fine droplet distribution. The constant vibration prevents accumulation of dirt or lime deposits in the nozzle. A close up view of the droplets is shown in the picture on the right.