Products > Multi outlet

Multi-Outlet Drippers

 

The Multi-Outlet sets are bundles of 4mm tubes that split the water from Ein-Tal’s unique Mini-Manifold to each end point dripper. Two types of end drippers are available:

1. The Self Forming Micro-Dripper is based on a male part labyrinth and a female part sleeve. The Micro-Dripper is formed by inserting the male labyrinth into the female sleeve. The female part also includes a tiny wedge.  This product can easily be cleaned when clogged simply by pulling out the male part and removing the dirt.

For a pressure water system the Multi-Outlet set is fed via a mother dripper that controls the flow. The mother drippers are available at 2 L/hr and 4 L/hr and the Mini-Manifold is available with 2, 4 and 6 outlets. The lowest flow is achieved by combining the 2 L/hr with the 6 outlets, i.e. 0.33 L/hr.

This type of Multi-Outlet Micro-Drippers can be used without the Mother Dripper in any Gravity Irrigation System  and particular for greenhouse applications

2.  The Multi-Outlet Regulated Drippers are bundles of the same structure, but with regulated end point drippers available at 2 and 4 L/hr each. This set is connected via the Mini-Manifold directly to the pressure line (without a Mother Dripper). Regulation at the end point is important merely for irrigation points located at various elevation levels, as shown in the pictures below.